You are here: Home > Ford > 03-04 Cobra
Choose a sub category:
Interior Cooling
Miscellaneous
Sort By:
Page of 2  
Lethal Performance 03-04 Cobra Intercooler Coolant Reservoir
List Price: $250.00
Our Price: $250.00
Lethal Performance 03-04 Cobra Intercooler Coolant Reservoir
All new from Lethal Performance is our own 03-04 Cobra Intercooler Coolant Reservoir. It's made for us by one of the industries best and looks, fits and performs great. The larger volume of fluid that this tank holds helps to keep intake air temperatures lower. At the track this tank really shows it's benefits as you can pack it with ice and water in between runs to chill the intercooler system which yields you faster times..

It's a direct replacement for your stock intercooler reservoir and holds plenty of fluid. It's got a fuel cell style cap and drain so it can easily be packed with ice. Unlike any other intercooler reservoir it mounts to the vehicle in 3 different places to ensure proper fitment. Offered in 3 different finishes. Bare Aluminum, Black Powdercoat and Polished/Chrome Powdercoat.
VMP GT500 pulley removal tool for 2007-2009 GT500
List Price: $139.99
Our Price: $129.95
You Save $10.04
VMP GT500 pulley removal tool for 2007-2009 GT500
New VMP Ultimate GT500 pulley puller and installer tool. Fine thread bolts and thrust washers for easier removal and installation. We looked at all the tools on the market and integrated the best features into our tool and are offering it at the best price.

This puller is different from most on the market, it grabs the pulley by the ribs, and leaves no marks. It also works with Lightnings, Rouscharged F150, Roushcharged Mustang (09+ M90 with press fit pulley or P51 TVS).

Also includes tool/bolt to press on your aftermarket pulley.

Will remove and install factory press-fit pulley while supercharger is still installed on the car.
Metco ICPCOBRA1 inter-changeable crank shaft pulley kit for 2003-2004 Mustang Cobra
List Price: $428.99
Our Price: $399.05
You Save $29.94
Metco ICPCOBRA1 inter-changeable crank shaft pulley kit for 2003-2004 Mustang Cobra
2003-2004 Ford Mustang Cobra

Interchangeable Crank Pulley Kit (Includes One Pulley Ring)

This comprehensive kit allows the user to replace the heavy factory crankshaft pulley and cage assembly with a lightweight, precision-machined aluminum hub and interchangeable outer ring.  The kit includes all of the necessary hardware, including a billet bracket to cleanly relocate the factory crank idler pulley.  Once this kit is installed, the user can adjust the vehicle's boost level by simply changing the outer pulley ring to any of the available Metco pulley rings, a process that takes just minutes.

This kit is custom-engineered to be a complete bolt-on, with no cutting, drilling, or irreversible changes required.  A special tool is included to assist the installer with removal of the factory pulley retaining bolt.  In most cases, total time required for installation is about two hours.  

This kit is identical to the Metco Motorsports ICPCOBRA2 except that this kit allows the user to select one pulley ring instead of two.

Pulley ring choices include:  1" smaller than stock diameter (for use with Kenne-Bell or Whipple superchargers), stock diameter, +2 lbs, +4 lbs, +6 lbs, +8 lbs, and +10 lbs.  Please make your selection below.  

Please note that Metco offers underdrive alternator pulleys that are recommended for use with +4 lb, +6 lb, +8 lb, and +10 lb crank pulley rings.  These alternator pulleys are listed in the Mustang Cobra section of our site.  

Note:  Metco Motorsports crankshaft pulley rings as included in this kit are also available separately.
MCI-90 Metco auxiliary idler for 2003-2004 Mustang Cobra
List Price: $202.99
Our Price: $187.99
You Save $15.00
MCI-90 Metco auxiliary idler for 2003-2004 Mustang Cobra
Auxiliary Idler Kit, 90mm

2003-2004 Mustang Cobra

This popular kit is designed to bolt on with no modifications and virtually eliminate belt slippage at the supercharger pulley.  The included aluminum mounting bracket is precision-machined and mounts to existing bolt locations, and the unique design provides unmatched durability and strength.

This kit includes a black hardcoat-anodized 90mm idler pulley, which is the smaller size that serves to maximize belt wrap in applications using stock size supercharger pulleys.

The kit includes a billet bearing cover for the pulley, and illustrated installation instructions are provided.  This product is an original Metco Motorsports design that has been copied a number of times, but none of the copies match the quality and precision fit of the original.

Note 1:  This kit is available with a larger 100mm idler pulley for applications using an overdrive (smaller) supercharger pulley under Metco Motorsports PN MCI-100, also listed in this section.  Both 90mm and 100mm kits are available with a double-bearing idler pulley upgrade for severe duty applications.

Note 2:  The third image shown of the idler kit installed shows an older design pulley without the bearing cover.  All kits shipped now include the revised pulley design with the bearing cover.
MCI-100 Metco auxiliary idler for 2003-2004 Mustang Cobra
List Price: $202.99
Our Price: $187.99
You Save $15.00
MCI-100 Metco auxiliary idler for 2003-2004 Mustang Cobra
Auxiliary Idler Kit, 100mm

2003-2004 Mustang Cobra

This popular kit is designed to bolt on with no modifications and virtually eliminate belt slippage at the supercharger pulley.  The included aluminum mounting bracket is precision-machined and mounts to existing bolt locations, and the unique design provides unmatched durability and strength.

This kit includes a black hardcoat-anodized 100mm idler pulley, which is the larger size that serves to maximize belt wrap in applications using stock size supercharger pulleys.

The kit includes a billet bearing cover for the pulley, and illustrated installation instructions are provided.  This product is an original Metco Motorsports design that has been copied a number of times, but none of the copies match the quality and precision fit of the original.

Note 1:  This kit is available with a smaller 90mm idler pulley for applications using an overdrive (smaller) supercharger pulley under Metco Motorsports PN MCI-90, also listed in this section.  Both 90mm and 100mm kits are available with a double-bearing idler pulley upgrade for severe duty applications.

Note 2:  The third image shown of the idler kit installed shows an older design pulley without the bearing cover.  All kits shipped now include the revised pulley design with the bearing cover.
MDL5000 Metco driveshaft loop for 1979-2004 Mustang and Cobra
List Price: $69.99
Our Price: $59.95
You Save $10.04
MDL5000 Metco driveshaft loop for 1979-2004 Mustang and Cobra
1979-2004 Mustang, Cobra

Metco's one-piece driveshaft safety loop is custom-designed to fit the floor pan of the 1979-2004 Mustang and Mustang Cobra.  The ring is made from seamless DOM steel in an oversize dimension to accommodate lowered vehicles and aftermarket driveshafts.  The flanges are laser-cut from heavy-duty steel and the assembly is precision-welded in a fixture.  The finished loop is powdercoated black and packaged with installation instructions and Grade 8 hardware.

This driveshaft loop is designed to mount to the floor pan within six inches of the front universal joint, and it requires that the user add four holes to the pan for the mounting bolts.
SCT X3 tuner - blank # 3000B
List Price: $379.00
Our Price: $379.00
Blank SCT X3 tuner.  

Comes with no tunes.  

Good for use when you need to download your custom tunes onto a SCT device.
Ford Mustang Cobra Seat Armour Protective Cover - Black
List Price: $49.99
Our Price: $47.50
You Save $2.49
Ford Mustang Cobra Seat Armour Protective Cover - Black
Smart Protection. Keep cool in the summer, and warm in the winter with a Seat Armour Protective Cover featuring the iconic Cobra logo. This luxurious 100% cotton seat cover will fit over any headrest and easily contours to the seat to protect your Mustangs upholstery from stains, odor, and perspiration.

Airbag Safe. This Seat Cover has no cumbersome pullovers, straps, or elastic, so it will not effect the deployment of your airbags in the case of an accident.

Application. This universal fit Cobra Seat Cover can be used on any year and model Mustang, or as a blanket when at the beach or the park. And is machine washable.

Mustang Fitment: 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Torco UL Accelerator - 32oz single can
List Price: $20.95
Our Price: $18.86
You Save $2.09
Torco UL Accelerator - 32oz single can
Torco Accelerator is not just another fuel additive.  It's simply a RACE FUEL CONCENTRATE! With many of the same additives our race fuel possesses, Torco Accelerator is a blend of components which will transform the make up of premium pump gas to closely resemble race fuel. Torco Accelerator will lower the end burn temperature which will make your fuel burn more complete thus releasing all of the power that your engine has to offer. Efficiency equals horse power!

All this- while raising the octane of your fuel. Mix a 32oz can of Torco Accelerator to 10 gallons of 91 Premium Unleaded to make an efficient 102 octane race gas, mix with 5 gallons of premium unleaded to make whopping 105 Octane. Accelerator is unleaded, so it won’t harm sensitive O2 sensors or catalytic converters

Un-chain yourself from the drum!


Here's the blend chart to mix the concentration you need:  http://torcoracefuel.net/2-docs/accelerator-blend-chart.gif
Torco UL Accelerator - 6 pack of 32oz cans
List Price: $125.70
Our Price: $113.13
You Save $12.57
Torco UL Accelerator - 6 pack of 32oz cans
Torco Accelerator is not just another fuel additive.  It's simply a RACE FUEL CONCENTRATE! With many of the same additives our race fuel possesses, Torco Accelerator is a blend of components which will transform the make up of premium pump gas to closely resemble race fuel. Torco Accelerator will lower the end burn temperature which will make your fuel burn more complete thus releasing all of the power that your engine has to offer. Efficiency equals horse power!

All this- while raising the octane of your fuel. Mix a 32oz can of Torco Accelerator to 10 gallons of 91 Premium Unleaded to make an efficient 102 octane race gas, mix with 5 gallons of premium unleaded to make whopping 105 Octane. Accelerator is unleaded, so it won’t harm sensitive O2 sensors or catalytic converters

Un-chain yourself from the drum!


Here's the blend chart to mix the concentration you need:  http://torcoracefuel.net/2-docs/accelerator-blend-chart.gif